Plogger Photo Feed: Warehouse Distribution Center Album

Warehouse Distribution Center

Sat, 18 Apr 2009 11:37:29 -0400

Warehouse Distribution Center

Project Change Orders

Sat, 18 Apr 2009 11:36:03 -0400

Project Change Orders

During the 90 days of our base bid John J. Pempek, Inc. also installed 65 dedicated outlets for computers, 27 electric fork lift chargers, and additional task lighting that was needed to make the facility operational by the January 7th deadline.

Project Change Orders

Sat, 18 Apr 2009 11:32:08 -0400

Project Change Orders

Early on in the project it was determined that the current 2- 2000amp services lacked the breaker space for the customers requirements. John J. Pempek, Inc. added two 2000amp sections to the existing services.

Project Oversight

Sat, 18 Apr 2009 11:28:42 -0400

Project Oversight

John Pempek, and Mike Pempek discuss the next phase of the project. Weekly meetings with all trades ensured that no suprises came up during this project and that all trades made their respective project completion dates on time.

Job Details

Sat, 18 Apr 2009 11:24:11 -0400

Job Details

John J. Pempek, Inc. had to remove 247 existing 400W metal halide lights and installed 796 new fluorescent hi-bay fixtures. We also added emergancy lighting and lighting under the conveyor mezzanine.

Job Details

Sat, 18 Apr 2009 11:19:31 -0400

Job Details

One of the many rows of rack lighting insalled during this project.

Job Details

Sat, 18 Apr 2009 11:14:53 -0400

Job Details

The 7 conveyor control panels were usually connected to power within 2 days of their being set.

Job Details

Sat, 18 Apr 2009 10:36:09 -0400

Job Details

There was approximately 4 1/2 miles of smaller conduits installed. These were supported by just short of a mile of Unistrut. We also consumed over 15 miles of wire size #2 and below.

Job Details

Sat, 18 Apr 2009 10:33:19 -0400

Job Details

Our longest continuous pull, 2 parallel runs of 4 - 500 MCM and 1 - 250 MCM, was exactly 935'

Job Details

Sat, 18 Apr 2009 10:30:48 -0400

Job Details

2 miles of 500 MCM cable, and just under 1 mile of 250 MCM cable.

Job Details

Sat, 18 Apr 2009 10:30:10 -0400

Job Details

The project took approximately 5 miles of 750 MCM cable,...

Job Details

Sat, 18 Apr 2009 10:29:14 -0400

Job Details

1,000' of 3" conduit, and 2,000' of 2 1/2" conduit.

Job Details

Sat, 18 Apr 2009 10:24:48 -0400

Job Details

For our portion of the job we installed 8,340' of 4" conduit,...

Critical Scheduling

Sat, 18 Apr 2009 09:22:22 -0400

Critical Scheduling

The conveyor contractor had the tightest schedule to get the warehouse's conveyer installed, and John J. Pemek, Inc. workers had to provide the power for it. Running conduit systems above the future conveyor and not impact the work of the other trades envolved.

Critical Scheduling

Sat, 18 Apr 2009 09:07:04 -0400

Critical Scheduling

The conduit rack had to cross 250' of future racking and be across that span fast enough so that the racking installation will not be delayed.